How to Fix Weak WiFi Signals Through Brick Walls and Concrete

Short answer: you usually cannot force a single router's signal through brick, stone or concrete. The fix is to place access points on the right side of those walls, so the signal does not have to go through them, and to connect those access points with Ethernet whenever practical. Professionally placed access points, ideally wired when possible, are usually a much better solution than trying to blast more signal from one location.

Why dense materials block WiFi

WiFi is a radio signal. Every material it passes through absorbs or reflects some of it. Drywall and wood cost relatively little. Dense or metal-containing materials cost much more:

  • Brick and stone

  • Concrete and concrete block

  • Metal, including some doors, appliances and framing

  • Tile, especially on walls

  • Older plaster, which can include metal lath

Higher-frequency WiFi bands give faster speeds at short range but lose strength faster through dense materials than lower bands do.

Common places this shows up

  • An interior brick or stone wall, such as around a fireplace

  • A room added onto the house, where the old exterior wall is now inside

  • Outdoor areas on the other side of an exterior wall

  • Garages and detached spaces

  • Office or commercial spaces with concrete or block walls

What does not work well

Moving the router a few feet

It may help a little, but if the brick wall is still between the router and the device, it is still in the way.

Buying a "more powerful" router

Your devices still have to send signal back through the same wall, and they are not getting stronger.

Extenders

An extender placed on the weak side of the wall picks up a weak signal and re-sends it, often slower and less stable.

What works

Put an access point on the other side

Instead of fighting the wall, put a source of signal in the space that needs it. That is the core idea behind multi-access-point WiFi.

Connect it with cable when practical

An access point on the far side of a brick wall still needs a connection back to the router. Over the air, that link has to cross the same wall. With Ethernet, the wall stops mattering. Wired backhaul is used where practical. In some locations a wireless link is the realistic option, and placement becomes even more important. Learn more about Ethernet cabling.

Use existing wiring

Many homes have Ethernet jacks or a structured media panel with unfinished wiring. Completing that wiring can provide backhaul without new runs.

Test after the install

Signal testing shows whether the space behind the wall actually has strong coverage.

What it costs

Cabling through or around masonry takes more time. Brick, exterior walls and similar obstacles are among the factors that increase cabling labor. All work is billed hourly, and most complete WiFi installs commonly land around $600–$1,200, depending on size, cabling, equipment and complexity.

When to call a professional

  • A brick, stone or concrete wall splits the house into a "good side" and a "bad side"

  • You need coverage outside, beyond an exterior wall. See WiFi for the backyard, pool and patio

  • An extender made things worse

  • The space is an office or business with block walls

How Bulletproof WiFi handles tough construction

You book the install. We come out and do an on-site network assessment and signal testing, plan the equipment around your priority areas, install all of it, and review the finished install with you. See whole-home WiFi installation and fixing dead zones and weak WiFi.

Get past the wall

Bulletproof WiFi has a 5-star Google rating. See our customer reviews. We serve homes and businesses across Dallas-Fort Worth and North Texas, including Collin County and Dallas County. See our service area. Call 469-261-7000 to schedule service.

Previous
Previous

Is Professional WiFi Installation Worth the Money?

Next
Next

Why Does My WiFi Work in Some Rooms but Not Others?