Short answer: in a completed residential home, a new Cat6 cable run averages about $600 per run. In a typical office or commercial building with a drop ceiling, the average is closer to $200 per run. Those are averages, not flat rates. All cabling is billed hourly, because nobody knows exactly what is inside a finished wall until the work begins.
Before paying for new cable, check whether your home already has Ethernet wiring that was never finished. That is often the least expensive way to get wired connections.
Why finished homes cost more
In an office with a drop ceiling, cable can be laid across accessible ceiling tiles. A finished home is different. Walls are closed, attics may be tight, and the path from one room to another is hidden. Time adds up when the installer has to work around:
Wall fishing through closed walls
Fire blocks inside wall cavities
Insulation
Brick and exterior walls
Vaulted ceilings
Crawlspaces
Attic areas that are hard to reach
Unexpected construction issues
Any of those can increase the final price.
How cabling is billed
Two-person cabling labor: $269/hour. The two-person rate is typically used for cabling jobs and longer cable pulls, where two technicians are needed for safety and efficiency.
One-person service: $199/hour during regular hours (Monday–Thursday 9am–5pm, Friday 11am–3pm), for smaller jobs such as terminating or repairing existing cable.
Materials: not included in the hourly rate. Cable, wall plates, keystone jacks, switches and patch panels are added as needed.
Minimum: one hour.
See the full average cabling costs and the Cabling Estimator for a preliminary number on your project.
Check the wires you already have
Many newer homes already have Ethernet wiring in the walls. The problem is that the wires are often left unfinished in the structured media panel, sometimes called a data panel or low-voltage box. It is commonly in a master closet, laundry room or utility room.
If the cables are there, they can be terminated, tested, labeled and connected so the jacks around the house actually work. Most basic structured media enclosure completion jobs are typically 2–3 hours at the standard rate. Learn more about data panel completion.
What category of cable?
Bulletproof WiFi installs Cat6 by default. For homes and most small businesses, it offers strong performance at a reasonable cost. Cat6a is used when a project specifically calls for full-length 10 Gbps runs.
What new Ethernet runs are good for
Wired backhaul for mesh nodes or access points, which can make WiFi dramatically more reliable
Home offices, so video calls do not depend on WiFi
Smart TVs and media rooms
Gaming consoles and PCs
Cameras and other wired devices
You do not need every device wired. A few well-chosen runs can help the whole network.
Ways to keep the cost down
Find out what is already installed. Finishing existing wiring is usually faster than running new cable.
Prioritize. Decide which rooms truly need a wired connection.
Use the estimator first. Gather square footage, attic access and the rooms you want wired.
Book the work, not a look. There are no free on-site estimates, and most projects can be estimated ahead of time.
When to call a professional
Fire blocks, insulation and finished surfaces make cable pulls in a finished home difficult, and a cable is only as good as its termination and testing. If you need runs through finished walls, or have existing wiring that does not work, professional installation is usually the faster and cleaner route. See network cable installation for more detail.
Get a cabling estimate
Bulletproof WiFi has a 5-star Google rating. See our customer reviews. We handle cabling for homes and businesses across Dallas-Fort Worth and North Texas, including Collin County and Dallas County. See our service area. Call 469-261-7000 or try the Cabling Estimator.