Ceiling-Mounted WiFi Access Points vs. Traditional Wireless Routers

Short answer: a traditional wireless router is one box, usually on a shelf near where the internet comes in, trying to cover the whole home. A ceiling-mounted access point is one of several units placed around a building, each connected by Ethernet. Ceiling access points can be a clean way to spread coverage, but each one needs a cable run to that spot, and that cable path has to be realistic. Shelf or countertop access points are often easier to place because they do not require ceiling mounting.

What is the difference?

Traditional wireless router

A router connects your home to the internet, hands out addresses to devices and, in most consumer models, also broadcasts WiFi. Because it sits wherever the internet line enters the house, its WiFi often starts from a corner, closet or cabinet.

Access points

An access point only broadcasts WiFi. It gets its connection over Ethernet from a router or switch. Several access points managed together create one network across the property.

There are two common styles:

  • Bookshelf or countertop access points sit on a shelf, desk, cabinet or countertop. They are often easier to place because they do not require ceiling mounting.

  • Ceiling-mounted access points attach to the ceiling and require a hardwired Ethernet run to that location.

Ceiling access points: pros and trade-offs

Pros

  • Out of the way and clean-looking

  • Mounted up high, away from furniture

  • Hardwired by design, so there is no wireless relay between the unit and the network

Trade-offs

  • Every ceiling access point needs an Ethernet run to that spot

  • If Ethernet is not already at the ceiling location, there is extra labor and material cost to run it

  • The cable path has to be realistic and serviceable

Where ceiling access point cabling is practical

  • Commercial drop ceilings: yes. Cabling can normally be run for ceiling access points in businesses with drop ceilings or panel ceilings.

  • Second floor of two-story homes: usually yes, because there is often attic access above the second-floor ceiling.

  • First floor of two-story homes: no. Bulletproof WiFi does not run new ceiling access point cables on the first floor of two-story homes when there is no attic access above. That usually requires opening sheetrock, and we do not offer that service.

What it costs

These are average hardware costs, not flat-rate promises. All work is billed hourly.

  • Bookshelf or countertop access point: about $85 per unit

  • Ceiling-mounted access point: about $115 per unit, plus the cable run

Average Cat6 cable runs are about $600 per run in a finished home and about $200 per run in a typical office drop ceiling. See access point and cabling costs.

Ceiling height can add a charge, but only when we actually work up on a tall ceiling:

  • Ceiling work over 12 feet: $75 taller-ladder charge

  • Ceiling work over 18 feet: $250 lift charge

Router vs. access points: which is right for you?

A single router may be adequate for a smaller home. For larger homes, two-story homes and homes with many devices, a multi-access-point system usually gives much better coverage and reliability.

Whether those access points go on a shelf or on the ceiling depends on the building, cable paths and where coverage is needed. Many good systems use a mix, and not every unit has to be on the ceiling or hardwired. See mesh vs. wired access points.

In offices and commercial spaces

Drop ceilings and panel ceilings often allow clean, practical cable paths, which makes ceiling access points common in offices. See business WiFi and cabling, panels and racks.

Plan it with a professional

You book the install. We come out and do an on-site network assessment and signal testing, plan the equipment around your priority areas, install all of it, and review the finished install with you.

Bulletproof WiFi has a 5-star Google rating. See our customer reviews. Call 469-261-7000 to schedule service anywhere in Dallas-Fort Worth and North Texas.

Previous
Previous

How Many Wireless Access Points Does a 4,000–6,000-Square-Foot Home Need?

Next
Next

WiFi 6 vs. WiFi 6E vs. WiFi 7: Should You Upgrade Your Home Network?